NEW
NEW
NEW

描述

The K360V sensor is a high precision wind vane with no dead band, a resolution of just 0.35º and an accuracy of +/- 1.4º. The wind vane is built from high strength anodized aluminum and is designed for use in wind & solar resource assessment as well as solar monitoring.

Case Study 2

Norway

Case Study 6

Germany

Case Study 7

Egypt

我们如何帮助您

请填写以下的表格,我们将尽快回复您。



The K360V sensor is a high precision wind vane with continuous 360º rotation and no dead band and a resolution of just 0.35º. Repeatability is a key factor in the production process of a wind vane meant to be used in wind resource assessment. The K360V wind vane has such a high repeatability that no individual calibration is required for each individual wind vane which means that data logger settings can be left with the factory slope and offset. The wind vane is designed for use in wind resource assessment, solar resource assessment as well as meteorology and environmental monitoring.

The K360V wind vane features a very low starting threshold of less than 0.4 m/s, an accuracy of +/- 1.4º and is built from high strength anodized aluminium and stainless steel. The wind vane is designed for mounting on a 25 mm (or 1”) diameter tube.

Optional two per box packages to reduce transport costs.

Add a Geovane to your wind vane

Given the impact incorrect wind direction measurements have, the recently updated IEC61400.12.1 (2017) now requires complete assessment of wind direction measurement uncertainties. By adding a Geovane to your wind measurement campaign you will get the most accurate wind direction data available on the market.

ELECTRICAL CHARACTERISTICS
Sensor type:Tunnel Magneto Resistance
Output signal:Analog
Output range:0…5V (0…360º)
Supply voltage:6…22V
Power consumption:<0.75 mA
Dead band:None
Resolution:0.35º
Accuracy:+/-1.4º
Miswire protection:Temperature fuse

 

SENSOR COMPATIBILITY
Compatible with:Orbit 360, EOL Zenith, all NRG loggers, Ammonit, Campbell

 

RESPONSE CHARACTERISTICS
Starting threshold:< 0.4 m/s according to ASTM standards D5366-96
Delay distance:< 1.7m/s

 

OPERATING RANGE
Measurement range:0 – 360º
Temperature:-40…+60 ºC
Humidity:0…100 % RH
Survival speed:60 m/s

 

PHYSICAL DIMENSIONS
Weight:0.250 kg
Height:265 mm
Body diameter:39.5 mm
Rotor diameter:330 mm

 

MATERIALS
Fin:Anodized aluminium
Body:Corrosion-resistant anodized aluminium
Bearing:Highly resistant ball bearings

 

INSTALLATION
Mounting:Onto a 25mm tube
Connection:4 pin aviation plug
Cable recommendation:Signal cable 4×0.5 mm2 + shield
Tools required:3 mm allen wrench, electrical tape

请求通话

填写表格,我们将尽快与您联系。

Enter your keyword