Vector W200P

vector-w200p-windvane

描述

The W200P wind vane is made from anodized aluminum alloys and stain­less steels for all the exposed parts of the wind vane. Combined with a hard plastic (upper) bearing and precision ball-races, the result is an ins­trument suitable for continuous exposure to the weather, with a long service interval.

Case Study 2

Norway

Case Study 6

Germany

Case Study 7

Egypt

我们如何帮助您

请填写以下的表格,我们将尽快回复您。



The W200P wind vane is designed for the acquisi­tion of the horizontal wind direction and incorporates a preci­sion wire-wound potentiometer as a shaft angle transducer, enabling wind direction sensed by the F20 fin to be accurate­ly determined when connected to suitable measuring equip­ment, such as a data logger or PLC.

The W200P wind vane is made from anodized aluminum alloys and stain­less steels for all the exposed parts of the wind vane. Combined with a hard plastic (upper) bearing and precision ball-races, the result is an ins­trument suitable for continuous exposure to the weather, with a long service interval.

The W200P wind vane is fully compatible with all the data loggers manufactured by Kintech Engineering including the EOL Zenith and Orbit 360.

Add a Geovane to your wind vane

Given the impact incorrect wind direction measurements have, the recently updated IEC61400.12.1 (2017) now requires complete assessment of wind direction measurement uncertainties. By adding a Geovane to your wind measurement campaign you will get the most accurate wind direction data available on the market.

CHARACTERISTICDESCRIPTION/VALUE
Threshold:0.6 m/s (standard), 0.75 m/s (*/WR), 0.5 m/s (*/LV)
Distance constant:2.3 m (standard), 2.4 m (*/LV)
Damping ratio:0.2 m (standard), 0.24 m (*/LV)
Recovery distance:0.51 m (standard), 0.54 m (*/LV)
Damped natural wavelength:3.4 m (standard), 3.6 m (*/LV)
Repeatability:+/- 0.5 ° if vane removed and replaced

Note: no measurable backlash movement during use

Accuracy:+/-3° in steady winds over 5 m/s (6 m/s (*/WR), 3.5 m/s (*/LV)),

with +/-2° obtainable following calibration

Maximum wind speed:over 75 m/s (standard), over 60 m/s (*/LV)
Range:360° mechanical angle, continuous rotation allowed
Temperature range:-50…+70 °C
Pot resistance:1 kΩ (+/- 10%)
Wiper current :50 μA recommended (20 mA absolute maximum)
Voltage:1…5 V (recommended), 20 V absolute maximum
Continuity angle:357.7 +/- 1.5° (2.3° gap at north)
Variation angle:356.5 +/-1.5° (3.5° dead-band)
Resolution:+/-0.2°
Independent non-linearity:+/-0.25° (unloaded)

请求通话

填写表格,我们将尽快与您联系。

Enter your keyword