描述

This sensor is used for measuring relative humidity and temperature and is probably the most common sensor for use in wind resource assessment studies.

Case Study 2

Norway

Case Study 6

Germany

Case Study 7

Egypt

产品查询

您对本产品有任何疑问吗? 填写表格,我们将尽快与您联系

This sensor is used for measuring relative humidity and temperature and is probably the most common sensor for use in wind resource assessment studies.

Temperature and air pressure significantly affect the AEP (Annual Energy Production) which is why you should be careful not to touch the highly sensitive sensor element in case you screw the filter off. If necessary, soiled filters can be screwed off and rinsed. When you screw them back on, bear in mind that sensors will not measure accurately again until they are completely dry.

The sensor is available with a 1.5 m connecting cable (PC series) or without cable (PK series).

Note: The sensor should be mounted inside a radiation shield protecting the sensor against rain and direct radiation.

DATAUNITS
Measuring range:-40°C to +70°C
Accuracy:+/- 0,5 Kelvin in the range from -40°C bis +70°C
Measuring rate:1 msec to 60 seconds, selectable in 1-msec increments
Output rate:1 msec to 60 seconds, selectable in 1-msec increments
Data output digital:RS485/RS422, bus operation, FD/HD
Baud rate:1200 to 921600 Bps
Analogue output:3 analogue channels for output of X,Y, Z vector-components 0-10 V load, 4000 ohms, 4-20 mA to 400 ohms load
Analogue inputs:3 x standard, 2 x optional; voltage inputs 0-10 V, resolution 16 bit, measurement error < 0,1%
Output-format:ASCII Thies, NMEA 0183 version 3, user-definable, status

请求通话

填写表格,我们将尽快与您联系。

Enter your keyword