接线板 EOL Zenith

wiring panel

描述

The Wiring Panel® for the EOL Zenith data logger is designed to increase the protection of the data logger from electrostatic discharges and make it even easier to connect lots of sensors.

Case Study 2

Norway

Case Study 6

Germany

Case Study 7

Egypt

我们如何帮助您

请填写以下的表格,我们将尽快回复您。



Category: Tag:

The Wiring Panel® for the EOL Zenith data logger is designed to increase the protection of the data logger from electrostatic discharges and make it even easier to connect lots of sensors. In case of lightning strikes the Wiring Panel diverts the energy to the GND/EARTH and thereby protects the data logger.

3 Stage Protection

As standard the Wiring Panel includes 14 channel protection boards. They reduce or even eliminate the loss of data and data logger failures related to electrostatic discharges. These boards protect each data line separately and can therefore also be replaced individually. The 3-stage protective boards derive the over-voltage from the signal cable to GND/EARTH. As the name says, the protection boards have 3 different discharge stages. Each stage has been appropriately designed according to the energy level to be derived. In this way we obtain an adequate response speed and better protection of the data logger.

Easy Wiring

Helps your installer to connect lots of sensors without the hassle and without cluttered sensor cables. With the Wiring Panel you no longer have to share any of the supply or reference inputs between sensors. Each fixed terminal block on the EOL Zenith Wiring Panel® has everything needed to connect a sensor separately.

请求通话

填写表格,我们将尽快与您联系。

Enter your keyword