Calibrated Solar Cell

Descrição

A silicon irradiance sensor is a cost-effective, however rugged and reliable solution to measure solar irradiance and especially useful for monitoring of Photovoltaic (PV) systems. The design of these silicon solar irradiation sensors, which corresponds to that of a photovoltaic module, makes these sensors ideally suited as a reference for monitoring photovoltaic systems

Case Study 2

Egypt

Case Study 6

Spain

Case Study 7

Spain

COMO PODEMOS AJUDAR?

Preencha o formulário abaixo com seus questionamentos e retornaremos.



Categorias ,

This photovoltaic reference cell offers an economical but robust and reliable solution for measuring solar irradiance levels, particularly for monitoring photovoltaic systems. The design of these silicon solar irradiation sensors, which corresponds to that of a photovoltaic module, makes these sensors ideally suited as a reference for monitoring photovoltaic systems. The spectral sensitivity, which corresponds to that of photovoltaic modules, and the very similar incident angle modifier, enable a precise analysis of photovoltaic yields using measured values from the sensor.

  • The measurement uncertainty of the Si sensor is class A as per IEC 61724-1
  • Model available with RS485 output and modbus protocol
  • IP67 aluminium case
  • 6 meter cable
  • Fully compatible with the Orbit 360 data logger

Power supply

12 – 28V

Power consumption

Typically 2mA

Temperature compensation

Yes
Output signal

Model dependent = RS485 (Modbus RTU), 0-5V, 4…20mA

Cell temperature output signal

0 – 5V (-40 a + 90ºC)

Measuring ranges

0…1500W/m2 and cell temperature -40…+90ºC
Measurement UncertaintyClass A as per IEC 61724-1

Solicitar uma chamada

Preencha o formulário e entraremos em contato com você o mais breve possível.

Enter your keyword