K620A
With our 20-year experience in the design and manufacturing of instrumentation for wind & solar resource assessment, this is another step in our efforts to offer a wide range of high-quality instruments and services that meet the needs of our global customers.
我们如何帮助您
请填写以下的表格,我们将尽快回复您。
Product Description
The body is made of high quality anodized aluminium and the cups are made of resistant polycarbonate and supplied with a factory calibration with wind speeds between 4-16 m/s in accordance with Measnet recommendations. The anemometer can be supplied with a Measnet calibration.
Benefits:
- Individual factory wind tunnel calibration 4-16 m/s (Measnet recommended measurement range)
- The K620A anemometer is a cost-effective sensor
- Corrosion resistant anodized aluminium
- Resistant injection molded polycarbonate cups
- Manufactured in the European Union
- Highly resistant ball bearings
- Easy assembly plug
- Low level AC sine wave output signal (no power consumption)
- Optional three-per-box packaging. Ensures safe and cost-effective transportation.
It is designed for mounting on 25 mm (or 1’’) diameter tube.
Applications:
Wind resource assessment, solar resource assessment, solar monitoring, meteorology and environmental monitoring.
ELECTRICAL CHARACTERISTICS
| Output signal: | Low-level AC sine wave, frequency linearly proportional to wind speed |
SENSOR COMPATIBILITY
| Compatible with: | Orbit 360, EOL Zenith, all NRG loggers, Ammonit, Campbell |
TRANSFER FUNCTION
| Equation: | V(m/s) = 0.62 * f (Hz) + 0.26 |
| Linearity (typical error): | < 0.025 m/s |
| Regression coefficient (r): | 0.99999 |
| Starting threshold: | < 0.3 m/s |
| Delay distance: | 1.7 m |
| Uncertainty: | @10 m/s 0.10 m/s @16 m/s 0.16 m/s |
OPERATING RANGE
| Sensor range: | 0.3…60 m/s |
| Temperature: | -50…+60 ºC |
| Humidity: | 0…100 % RH |
PHYSICAL DIMENSIONS
| Weight: | 0.185 kg |
| Height: | 207 mm |
| Body diameter: | 39.5 mm |
| Rotor diameter: | 156 mm |
MATERIALS
| Cups: | Injection-molded polycarbonate |
| Body: | Corrosion-resistant anodized aluminium |
| Bearings: | Highly resistant ball bearings |
INSTALLATION
| Mounting: | Onto a 25mm tube |
| Connection: | 4 pin aviation plug |
| Cable recommendation: | Signal cable 2×0.5 mm2 + shield |
| Tools required: | 3 mm allen wrench, electrical tape |



