Windsensor P2546C

WindsensorAnemometerPC

Description

The WindSensor P2546-OPR Cup Anemometer combines unrivaled performance and is ideally suited for wind resource assessment and power performance studies both onshore and offshore.

Case Study 2

Norway

Case Study 6

Germany

Case Study 7

Egypt

HOW CAN WE HELP?

Tell us what you need by filling in the form below and we will get back to you.



This version, the P2546C-OPR (coil version), features permanent magnets mounted on the shaft that induce a sine wave voltage inside a coil. This produces an output signal with frequency proportional to wind speed.

We also offer the P2546A-OPR coil version click here for more information on this version.

P2546-OPR features

  • One-piece rotor anemometer head
  • Durable construction with anodized aluminum and stainless steel
  • Low threshold speed
  • Short distance constant
  • Negligible overspeeding
  • Angular response independent of wind speed
  • Fully tested temperature performance
  • Symmetrical geometry
  • No external power source

The cup anemometer is supplied with a Measnet calibration certificate and is fully compatible with all the data loggers manufactured by Kintech Engineering including the EOL Zenith and Orbit 360.

DATAUNITS
Sensor type:3-cup anemometer
Sensor range:0…75 m/s
Signal type:Low level AC sine wave, frequency linearly proportional to wind speed
Anemometer Transfer Function:Refer to individual calibration report for transfer function.
Output voltage at threshold:80 mV (peak-to-peak) minimum
Output voltage at 60Hz:* 14 V (peak-to-peak) typical
* output amplitude NOT proportional to wind speed
Output signal range:0 Hz…120 Hz
Uncertainty (IEC 61400-12-1 Classification A):Class 1.32A
Uncertainty (IEC 61400-12-1 Classification B):Class 3.71B
Threshold:< 0.4 m/s
Distance constant:(63% recovery) 1.81±0.04 m

 

Request a callback

Fill in the form and we will call you back as soon as possible.

Enter your keyword